IMPORTANT: Read all instructions carefully before starting installation. Ensure your wall type supports the heavy-duty loading capacity of this product.

1. Recommended Tools

• Stud Finder
• Bubble Level
• Tape Measure & Pencil
• Electric Drill & Drill Bits
• Socket Wrench / Screwdriver

2. Step-by-Step Installation

Step 1: Locate Wall Studs
Use a stud finder to locate the center of your wall studs (typically spaced 16″ or 24″ apart). Mark the stud centers with a pencil.

Step 2: Mark Mounting Holes
Hold the mounting brackets against the wall at your desired height. Use a bubble level to ensure the brackets are completely straight, then mark the pilot hole locations.

Step 3: Drill Pilot Holes
Drill pilot holes into the marked wall stud centers using the appropriate drill bit size (typically 3/16″ for wood studs).

Step 4: Secure Brackets
Attach the brackets using the provided heavy-duty lag bolts and washers. Tighten firmly with a socket wrench until flush against the wall. Do not over-tighten.

Step 5: Assemble Shelf / Rack
Place the shelving panels or horizontal crossbars onto the installed brackets and secure them with the included hardware according to your layout.

3. Safety & Loading Tips

• Wall Compatibility: Mounting directly into solid wood studs or concrete walls is required. Do NOT install into drywall alone without proper structural backing.
• Weight Limit: Evenly distribute stored items across the shelf/rack. Never exceed the rated weight capacity.